Free files / Geometric and practicalRosette Coasters
A 95mm coaster with an engraved rosette, in six, eight and twelve petal versions.
Rosette Coasters 6
A 95mm coaster with an engraved rosette, in six, eight and twelve petal versions. Units are millimetres. Red paths cut, blue paths engrave. Free for personal and commercial use, no attribution required. lasercanvas.app
Rosette Coasters 6
95 × 95 mm
Download SVG
Rosette Coasters 8
A 95mm coaster with an engraved rosette, in six, eight and twelve petal versions. Units are millimetres. Red paths cut, blue paths engrave. Free for personal and commercial use, no attribution required. lasercanvas.app
Rosette Coasters 8
95 × 95 mm
Download SVG
Rosette Coasters 12
A 95mm coaster with an engraved rosette, in six, eight and twelve petal versions. Units are millimetres. Red paths cut, blue paths engrave. Free for personal and commercial use, no attribution required. lasercanvas.app
Rosette Coasters 12
95 × 95 mm
Download SVG
Cutting it
Suggested material: 3mm plywood, cork, or 3mm acrylicSize: 95 × 95 mm, 95 × 95 mm, 95 × 95 mmUnits: millimetres. The file imports at true size — no scaling step.Colours: red paths are cut lines, blue paths are engrave lines.
Cut the disc, engrave the rosette. On cork, drop the engrave power well below the plywood setting.
In LaserCanvas
Download the file, then open LaserCanvas and import it. Assign cut and engrave to the two colours in Prepare, pick your material, and the toolpath preview shows what will happen before anything moves.
Open LaserCanvas →
Licence
These files are free to download, cut, modify, sell and give away, for personal and commercial use, with no attribution required. They are provided as they are, with no warranty — check dimensions and do a test cut before committing good material.
Cut it in your browser
Import the SVG, set your material, and send it to your laser. Nothing to install.
Open LaserCanvas →
LaserCanvas
